https://teamknox.com/en/projects/robocar/index.html TriClops Front left On the table Three eyes Top-down view from the front left Appearance when mounted on a stand Camera sensor: monocular + stereo camera RoverSometimes I call it “RoboCar,” sometimes “Cyclops” when it’s a monocular setup, and “TriClops” when it’s a Raspberry Pi camera paired withOak D-Lite… But now that it has three eyes, I’ll call it “TriClops.” One thing I can say about this project is that, among all the DIY projects I’ve worked on—including the electronics projects I’ve handled—this is the largest in scale and has the biggest budget.It also incorporates a wealth of various projects I’ve developed so far. As for its current form, let’s call itTriClops-RoboCar. Hugo en-us https://teamknox.com/en/projects/robocar/mechanics/index.html Mon, 01 Jan 0001 00:00:00 +0000 https://teamknox.com/en/projects/robocar/mechanics/index.html Overview Mechanicsprimarily refers to a robot’s mechanical structure. It is a crucial element that, along with the design that determines the robot’s appearance, dictates most of its physical movements. In this section, we will focus on Cơ-nam wheels. Mechanical Components Description Assembly of mechanical components, including wiring to the motor control board and motors Frame The frame features a rigid structure consisting of six 15mm x 15mm x 130mm aluminum frames from Misumi.A distinctive feature is the use of L-shaped brackets on the frame beam connecting the front and rear wheel sections to create a stepped design that reduces the overall height. This lowers the vehicle’s ride height, shifts the center of gravity downward for improved stability, and gives it a cleaner, sleeker appearance. https://teamknox.com/en/projects/robocar/hardware/index.html Mon, 01 Jan 0001 00:00:00 +0000 https://teamknox.com/en/projects/robocar/hardware/index.html Introduction: This section explains the electrical components used in the “ RoboCar-TriClopes .” While some explanations of “Hardware ” also include the “Mechanics ” (as described elsewhere), Old-School separates the physical mechanical components (Mechanics ) from the electrical components (Hardware ). You could also call it “Electronics ,” and there is even a term called “Mechatoronics https://teamknox.com/en/projects/robocar/software/index.html Mon, 01 Jan 0001 00:00:00 +0000 https://teamknox.com/en/projects/robocar/software/index.html https://teamknox.com/en/projects/robocar/auxillary/index.html Mon, 01 Jan 0001 00:00:00 +0000 https://teamknox.com/en/projects/robocar/auxillary/index.html